How do I find my microphone sensitivity?

Check the microphone specifications. Sensitivity is given in dBV (referenced to 1V at 94 dB SPL, or 1 Pa). Common values: large diaphragm condenser -32 to -38 dBV, small diaphragm condenser -35 to -40 dBV, dynamic mic -50 to -60 dBV, ribbon mic -50 to -60 dBV.

How much gain do dynamic microphones need?

Dynamic microphones typically need 40-60 dB of gain for typical sources. Ribbon microphones may need 55-65 dB. Low-output dynamics like the SM7B recording quiet speech may need 60+ dB. This is why dedicated preamps or inline boosters (like Cloudlifter) are popular for these microphones.

What SPL should I use for the calculation?

Use the average SPL of your source at the microphone position. Typical values: quiet speech 60-65 dB, normal speech 70-75 dB, singing 80-95 dB, acoustic guitar 75-85 dB, drum kit 95-110 dB, guitar amplifier 95-115 dB.

Why does my preamp hiss with high gain?

All preamps add noise, characterised by their EIN (Equivalent Input Noise). At high gain settings, this noise becomes more audible relative to the signal. Better preamps have lower EIN (typically -125 to -130 dBu). For high-gain applications, choose a preamp with the lowest EIN possible.

AudioCalcs

Preamp Gain Calculator — Required Gain from Mic Sensitivity

Calculate required preamp gain from microphone sensitivity and target recording level.

Mic Sensitivity

From mic specifications (at 94 dB SPL)

SPL at Microphone

Enter the spl at microphone

Target Recording Level

Enter the target recording level

Converter Alignment

Enter the converter alignment

How We Calculate This

Mic Output Level

Mic Output (dBV) = Sensitivity + (SPL at mic − 94)

Microphone sensitivity is specified at 94 dB SPL (1 Pascal). For every dB above or below 94, the output changes by the same amount.

Required Gain

Gain (dB) = Target Level (dBV) − Mic Output (dBV)

Target level in dBV = (target dBFS + converter alignment) − 2.2

Frequently Asked Questions

Related Calculators

Sample Rate Calculator

Calculate maximum reproducible frequency (Nyquist) and convert between common sample rates for digital audio. Free online calculator.

Bit Depth Calculator

Calculate dynamic range, signal-to-noise ratio and quantisation levels from bit depth. Essential for digital audio recording decisions.

Audio File Size Calculator

Estimate uncompressed audio file sizes for WAV, AIFF and other recording formats based on sample rate, bit depth and channel count.

Track Count Calculator

Calculate storage space and bandwidth requirements for multitrack recording sessions based on track count, sample rate and bit depth.

Headroom Calculator

Calculate available headroom from peak level and convert between dBFS and dBu scales. Essential for professional recording and mixing.

Last updated: February 2026

All calculations are estimates based on standard formulas. Always verify results for critical applications.